From: GOLBERY Irčne (irene.golbery@xxxxxxxx)
Date: Fri Jun 28 2002 - 11:15:58 GMT-3
Hi,
Please, I need your feed back.
Can you try to clarify this example or to indicate an URL where it is well
explained ( When Canonical to non Canocical transformation is needed and
the reverse)
This is the scenario
r1 and r2 are configured as dlsw peers.
r1 has a host on e0 network.
r2 has host-1 and host-2 on its to0 network.
I want r1's host to communicate with only host-1 on r2.
MAC addresses for the hosts are :
r1 host = 0000-8616-3F04
r2 host-1 = 0000-F669-5EE7
r2 host-2 = 0000-F669-5F25
r1:
dlsw local-peer peer-id 10.1.1.1
dlsw remote-peer peer-id 10.2.2.2
dlsw bridge-group 1
!
access-list 700 permit 0000.6F96.7AE1 0000.0000.0000
or
access-list 700 permit 0000.F669.5ee7 0000.0000.0000
!
int e0
bridge-group 1
!
bridge 1 protocol ieee
And now if I want r2's hosts to communicate with r1 host ( canonical, non
canonical ?)
Thanks for your help
Irene
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:43 GMT-3