dlsw problem

From: atul pawar (atulpawar@xxxxxxxxxxx)
Date: Fri Jun 28 2002 - 09:25:12 GMT-3

• Next message: Reggie Terrell: "Re: Frame relay static maps"
• Previous message: ccie spoon: "Re: Frame relay static maps"
• Next in thread: Nii orfson: "Re: dlsw problem"
• Maybe reply: Nii orfson: "Re: dlsw problem"
• Maybe reply: Ademola Osindero: "Re: dlsw problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
hi guyes
I'm a bit confused about following dlsw setup. r3 is peering with r1 and r2
. r1 has got cost 2 and r2 has got cost 4. So r1 would be preferred path for
a host on the Lan. In case r1 fails it would prefer r2. I have normal dlsw
config on all routers and bridge groups configured. My question is do I need
to configure the explorer-wait-time
timer on r3 so that it waits till it gets all responses back.? I have seen
configs where I don't see this timer. And also is there anything else I need
to configure ?
Cheers
Atul

     LAN
r1------------r2
  \ /
   \ /
    \ FR /
       |
       |
       r3---token-ring

           Atul

• Next message: Reggie Terrell: "Re: Frame relay static maps"
• Previous message: ccie spoon: "Re: Frame relay static maps"
• Next in thread: Nii orfson: "Re: dlsw problem"
• Maybe reply: Nii orfson: "Re: dlsw problem"
• Maybe reply: Ademola Osindero: "Re: dlsw problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:43 GMT-3