From: Jay Hennigan (jay@xxxxxxxx)
Date: Thu Jun 27 2002 - 01:43:54 GMT-3
On Thu, 27 Jun 2002, Tom Young wrote:
> Thanks for you reply, would you plz let me check some
> points?
>
> 1, I should config a modem to connect my aux port.
Yes. And set it to auto-answer on the first (or whatever) ring.
> 2, The cable between router and medom is a crossover
> cable.
No, not an ethernet crossover. A "rollover" cable. The flat light blue
or black cable supplied by Cisco with the router.
> 3, I should set a password for dail-in authentication. If
> so, how about the user ID?
If you have just "login" in the line config, then you'll just be prompted
for a password. If you have "login local" then you need a line such as
"username myname password mypass"
in the global configuration section and it will ask for both a username
and password.
-- Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net NetLojix Communications, Inc. - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:42 GMT-3