From: Jay Hennigan (jay@xxxxxxxx)
Date: Thu Jun 27 2002 - 00:45:46 GMT-3
On Thu, 27 Jun 2002, Tom Young wrote:
> If I want to set a dial in configuration, that dial into
> my router for remote maintance. Would you plz check the
> manual for me?
>
> 1,Connect a dialog tele line into my router.
>
> 2,Only config the data blow
>
> autoband
> modem InOut
> transport input all
> flowcontrol hard
> stopbit 1
> login
You would do this in the "line aux 0" section.
You should also configure a password on the line in the same section.
While in the config-line section add "password cisco" which would set
the password to "cisco". You might want something less obvious.
Also set an enable secret.
You'll also need to configure the modem for auto-answer and connect it to
the Aux port with the appropriate rollover cable and hood.
> 3,To dial the tele line's Number for coming into the
> router from remote.
Yep.
-- Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net NetLojix Communications, Inc. - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:42 GMT-3