From: Todd Carswell (acarswell@xxxxxxxxx)
Date: Wed Jun 26 2002 - 12:04:43 GMT-3
Michael,
What IPX network did you use to define the servers? If they're defined
as existing on the same ethernet subnet shared between R1 and R2, they
won't show up on R2 at all. This is because R1 assumes that R2 is
seeing the servers so it's not advertising them.
HTH
Todd Carswell
Michael Popovich wrote:
>I am just setting up a basic IPX network.
>
>R1-----Ethernet-----R2
>
>Running IPX EIGRP.
>
>R1 has IPX servers defined but they do not show up on R2, but routing is
>working fine.
>Not sure what the issue is here.
>
>TIA
>
>MP
>
>
>Output from R1:
>
>r1#sh ipx servers
>Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + =
>detail
>U - Per-user static
>2 Total IPX Servers
>
>Table ordering is based on routing and server info
>
> Type Name Net Address Port Route
>Hops Itf
>S 4 PRINTER1 100.0004.0004.0004:000F conn 5
>Et1/0
>S 7 SERVER1 100.0005.0005.0005:000F conn 5
>Et1/0
>r1#sx
>Codes: C - Connected primary network, c - Connected secondary network
> S - Static, F - Floating static, L - Local (internal), W - IPXWAN
> R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
> s - seconds, u - uses, U - Per-user static/Unknown, H - Hold-down
>
>8 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.
>
>No default route known.
>
>L 1 is the internal network
>C 100 (NOVELL-ETHER), Et1/0
>E 2 [45867776/1] via 100.00d0.ba21.a280, age 00:12:59,
> 1u, Et1/0
>E 5 [46379776/1] via 100.00d0.ba21.a280, age 00:02:40,
> 1u, Et1/0
>E 6 [46379776/1] via 100.00d0.ba21.a280, age 00:02:09,
> 1u, Et1/0
>E 7 [46382336/1] via 100.00d0.ba21.a280, age 00:02:54,
> 1u, Et1/0
>E 400 [20537600/0] via 100.00d0.ba21.a280, age 00:03:04,
> 1u, Et1/0
>E 500 [20540160/0] via 100.00d0.ba21.a280, age 00:02:40,
> 1u, Et1/0
>
>Output from R2:
>
>r2#show ipx server
>
>r2#sx
>Codes: C - Connected primary network, c - Connected secondary network
> S - Static, F - Floating static, L - Local (internal), W - IPXWAN
> R - RIP, E - EIGRP, N - NLSP, X - External, A - Aggregate
> s - seconds, u - uses, U - Per-user static/Unknown, H - Hold-down
>
>8 Total IPX routes. Up to 1 parallel paths and 16 hops allowed.
>
>No default route known.
>
>L 2 is the internal network
>C 100 (NOVELL-ETHER), Et0/0
>C 400 (FRAME-RELAY), Se0/0.256
>E 1 [45867776/1] via 100.0007.5080.8291, age 00:15:01,
> 1u, Et0/0
>E 5 [46354176/1] via 400.0005.0005.0005, age 00:04:08,
> 1u, Se0/0.256
>E 6 [46354176/1] via 400.0006.0006.0006, age 00:04:07,
> 1u, Se0/0.256
>E 7 [46356736/1] via 400.0005.0005.0005, age 00:04:08,
> 1u, Se0/0.256
>E 500 [20514560/0] via 400.0005.0005.0005, age 00:04:08,
> 31u, Se0/0.256
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:42 GMT-3