From: Donny MATEO (donny.mateo@xxxxxxxxxxxxxxxxxx)
Date: Wed Jun 26 2002 - 06:37:40 GMT-3
Hi Oli,
thank you for the answer, I need some confirmation since I'm not sure it
can be done.
Thank you.
Donny
Oliver Boehmer
<oboehmer@cisco.c To: "Donny MATEO" <donny.m
ateo@sg.ca-indosuez.com>
om> cc: ccielab@groupstudy.com
Subject: Re: multiple BRI to PR
I
26-06-2002 17:32
Donny,
it works just as you described: configure "dialer pool-member 1" on all
physical interfaces and "dialer pool 1" on the Dialer.. If you only connect
to a single site, you could also use "dialer rotary-group 1" on all
physicals and configure Dialer1..
oli
At 14:13 26.06.2002 +0800, Donny MATEO wrote:
>Hi Group,
>
>I have a question regarding ISDN connection. If suppose I have several BRI
>interface to be used to connect to a central site with a single PRI
(T1/E1)
>interface.
>Can I bind all 3 BRI interface into one dialer profile and use ppp
>multilink to use all 3 line to call the central line.
>The objective is to have something like aggregated througput (3 x 128Kbps)
>to the central site. I know of ppp multilink on ISDN, but as far as I know
>it's only used for binding the second B channel after the configured load
>threshold, another one is multilink frame relay, but that's for
>frame-relay.
>So, what about ISDN ? Is it possible to achieve this ?
>
>Donny
>
>
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:42 GMT-3