From: Oliver Boehmer (oboehmer@xxxxxxxxx)
Date: Wed Jun 26 2002 - 06:32:49 GMT-3
Donny,
it works just as you described: configure "dialer pool-member 1" on all
physical interfaces and "dialer pool 1" on the Dialer.. If you only connect
to a single site, you could also use "dialer rotary-group 1" on all
physicals and configure Dialer1..
oli
At 14:13 26.06.2002 +0800, Donny MATEO wrote:
>Hi Group,
>
>I have a question regarding ISDN connection. If suppose I have several BRI
>interface to be used to connect to a central site with a single PRI (T1/E1)
>interface.
>Can I bind all 3 BRI interface into one dialer profile and use ppp
>multilink to use all 3 line to call the central line.
>The objective is to have something like aggregated througput (3 x 128Kbps)
>to the central site. I know of ppp multilink on ISDN, but as far as I know
>it's only used for binding the second B channel after the configured load
>threshold, another one is multilink frame relay, but that's for
>frame-relay.
>So, what about ISDN ? Is it possible to achieve this ?
>
>Donny
>
>
>
>This message is for information purposes only and its content
>should not be construed as an offer, or solicitation of an offer,
>to buy or sell any banking or financial instruments or services
>and no representation or warranty is given in respect of its
>accuracy, completeness or fairness. The material is subject
>to change without notice. You should take your own independent
>tax, legal and other professional advice in respect of the content
>of this message. This message may contain confidential or
>legally privileged material and may not be copied, redistributed
>or published (in whole or in part) without our prior written consent.
>This email may have been intercepted, partially destroyed,
>arrive late, incomplete or contain viruses and no liability is
>accepted by any member of the Credit Agricole Indosuez group
>as a result. If you are not the intended recipient of this message,
>please immediately notify the sender and delete this message
>from your computer.
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:42 GMT-3