From: Eric Rogers (eric.rogers@xxxxxxxxxxxxx)
Date: Mon Jun 24 2002 - 19:06:55 GMT-3
Just got a new 3550-EMI 24port.
Check the sh ip portion. Yep, it's an IP router!
Looks like this little bad boy could actually throw a rather large monkey
wrech into the works.
-Eric
############################################################################
3550-EMI#?
Exec commands:
access-enable Create a temporary Access-List entry
access-template Create a temporary Access-List entry
archive manage archive files
cd Change current directory
clear Reset functions
clock Manage the system clock
cluster cluster exec mode commands
configure Enter configuration mode
connect Open a terminal connection
copy Copy from one file to another
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
disconnect Disconnect an existing network connection
dot1x IEEE 801.1X commands
enable Turn on privileged commands
erase Erase a filesystem
exit Exit from the EXEC
format Format a filesystem
fsck Fsck a filesystem
help Description of the interactive help system
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
mkdir Create new directory
more Display the contents of a file
mrinfo Request neighbor and version information from a multicast
router
mrm IP Multicast Routing Monitor Test
mstat Show statistics after multiple multicast traceroutes
mtrace Trace reverse multicast path from destination to source
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
rcommand Run command on remote switch
reload Halt and perform a cold restart
rename Rename a file
resume Resume an active network connection
rmdir Remove existing directory
rsh Execute a remote command
send Send a message to other tty lines
setup Run the SETUP command facility
show Show running system information
systat Display information about terminal lines
telnet Open a telnet connection
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
tunnel Open a tunnel connection
udld UDLD protocol commands
undebug Disable debugging functions (see also 'debug')
verify Verify a file
vlan Configure VLAN parameters
vmps VMPS actions
where List active connections
write Write running configuration to memory, network, or
terminal
############################################################################
###########
3550-EMI#sh ip ?
access-lists List IP access lists
accounting The active IP accounting database
aliases IP alias table
arp IP ARP table
cache IP fast-switching route cache
cef Cisco Express Forwarding
dvmrp DVMRP information
eigrp IP-EIGRP show commands
flow NetFlow switching
igmp IGMP information
interface IP interface status and configuration
irdp ICMP Router Discovery Protocol
local IP local options
masks Masks associated with a network
mcache IP multicast fast-switching cache
mpacket Display possible duplicate multicast packets
mrm IP Multicast Routing Monitor information
mroute IP multicast routing table
msdp Multicast Source Discovery Protool (MSDP)
nat IP NAT information
ospf OSPF information
pim PIM information
prefix-list List IP prefix lists
protocols IP routing protocol process parameters and statistics
redirects IP redirects
rip IP RIP show commands
route IP routing table
rpf Display RPF information for multicast source
sdr Session Directory (SDPv2) cache
sockets Open IP sockets
traffic IP protocol statistics
vrf VPN Routing/Forwarding instance information
############################################################################
################
3550-EMI(config)#?
Configure commands:
aaa Authentication, Authorization and Accounting.
access-list Add an access list entry
alias Create command alias
arp Set a static ARP entry
banner Define a login banner
boot Boot Commands
bridge Bridge Group.
buffers Adjust system buffer pool parameters
cdp Global CDP configuration subcommands
class-map Configure QoS Class Map
clock Configure time-of-day clock
cluster Cluster configuration commands
default Set a command to its defaults
default-value Default character-bits values
define interface range macro definition
dnsix-dmdp Provide DMDP service for DNSIX
dnsix-nat Provide DNSIX service for audit trails
dot1x IEEE 802.1X subsystem
downward-compatible-config Generate a configuration compatible with older
software
enable Modify enable password parameters
end Exit from configure mode
errdisable Error disable
exception Exception handling
exit Exit from configure mode
file Adjust file system parameters
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip Global IP configuration subcommands
key Key management
line Configure a terminal line
logging Modify message logging facilities
mac Global MAC configuration subcommands
mac-address-table Configure the MAC address table
map-class Configure static map class
map-list Configure static map list
mls Global Multi-Layer Switching parameters
monitor Configure SPAN monitoring
mvr Enable/Disable MVR on the switch
no Negate a command or set its defaults
ntp Configure NTP
policy-map Configure QoS Policy Map
port-channel EtherChannel configuration
priority-list Build a priority list
privilege Command privilege parameters
process-max-time Maximum time for process to run before
voluntarily relinquishing processor
queue-list Build a custom queue list
rmon Remote Monitoring
route-map Create route-map or enter route-map command
mode
router Enable a routing process
rtr RTR Base Configuration
scheduler Scheduler parameters
sdm Switch database management
service Modify use of network based services
shutdown Shutdown system elements
snmp-server Modify SNMP parameters
spanning-tree Spanning Tree Subsystem
subscriber-policy Subscriber policy
switchcore switchcore configuration
system Set the system configuration
tacacs-server Modify TACACS query parameters
template Select a template to configure
tftp-server Provide TFTP service for netload requests
time-range Define time range entries
udld Configure global UDLD setting
username Establish User Name Authentication
vlan Vlan commands
vmps VMPS settings
vtp Configure global VTP state
############################################################################
3550-EMI(config)#router ?
bgp Border Gateway Protocol (BGP)
egp Exterior Gateway Protocol (EGP)
eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
igrp Interior Gateway Routing Protocol (IGRP)
isis ISO IS-IS
iso-igrp IGRP for OSI networks
mobile Mobile routes
odr On Demand stub Routes
ospf Open Shortest Path First (OSPF)
rip Routing Information Protocol (RIP)
static Static routes
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:40 GMT-3