From: GOLBERY Irčne (irene.golbery@xxxxxxxx)
Date: Mon Jun 24 2002 - 05:45:07 GMT-3
I have had a look on the cisco web :
http://www.cisco.com/warp/public/103/eigrp1.html
Note that if you change the hello interval, the hold time is not
automatically adjusted to account for this change - you must manually adjust
the hold time to reflect the configured hello interval.
Then it seems the only way to change the holdtime is to use "ipx eigrp hold
time" cmd
Need some other feed back.
Thanks
Irene.
-----Message d'origine-----
De : Paul [mailto:p_chopin@yahoo.com]
Envoyi : jeudi 20 juin 2002 06:43
@ : ccielab@groupstudy.com
Objet : IPX eigrp hello-interval commnd
Hi group,
I've been playing recently with ipx eigrp. It is said
on Cisco web site, that hold-time is 3 times
hello-interval,and if hold-time is less than 2 tims
hello-interval it resets. It seems to me, dosen't
matter what value I put for hello-interval , hold-time
stays the same.
Can someboy explain this please?Does it require
another
command in order to work?
Paul
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:40 GMT-3