Re: ISDN config in CIM

From: Dan (dp595@xxxxxxxxxxxxx)
Date: Fri Jun 21 2002 - 17:34:10 GMT-3

• Next message: Denise Donohue: "Re: IPSec with a Tunnel as the egress interface"
• Previous message: Dennis: "RE: Please re- read a see can you help (More exact problem)"
• Maybe in reply to: Peng Zheng: "ISDN config in CIM"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
It depends on the telco switch. Some carriers don't require you to
use/negotiate spids (although it's usually required in the U.S.).

Dan Pontrelli
CCIE#8040

> Hi,
>
> I'm using Cisco Interactive Mentor.
>
> I remember I saw "isdn spid1" is necessary under bri
> interface for ISDN.
>
> But in the ISDN configuration of CIM, there is no
> "isdn
> spid1" configration under bri0, they use dialer map
> with dial number instead of it. So it means "isdn
> spid1" is not necessary.
>
> I'm wondering when I should ignore "isdn spid1" .
>
>
> Thank you for help.
>
> Best Regards,
> Peng Zheng
>

• Next message: Denise Donohue: "Re: IPSec with a Tunnel as the egress interface"
• Previous message: Dennis: "RE: Please re- read a see can you help (More exact problem)"
• Maybe in reply to: Peng Zheng: "ISDN config in CIM"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:39 GMT-3