From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Thu Jun 13 2002 - 00:55:27 GMT-3
Check that you have not typed a space after one of the key-strings.
Jason Sinclair CCIE #9100
Manager, Network Control Centre
POWERTEL
55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
email: sinclairj@powertel.com.au
-----Original Message-----
From: Emmanuel Oppong [mailto:e-oppong@attbi.com]
Sent: Thursday, 13 June 2002 13:19
To: ccielab@groupstudy.com
Subject: RIP v2 Authentication not working
Hi folks,
I have the following configs for authenticating routing updates between 2
RIP v2 routers: BB2 and r4. I thought this config should work fine. But it
doesn't. Without the authentication I receive routes between the 2 routers.
Debug shows that I have invalid authentication. What could be wrong. Any
ideas?
Router BB2:
key chain r4
key 1
key-string cisco4
!
interface TokenRing0
ip rip authentication mode md5
ip rip authentication key-chain r4
!
Router r4:
key chain bb2
key 1
key-string cisco4
!
interface TokenRing0
ip rip authentication mode md5
ip rip authentication key-chain bb2
!
BB2:
debug ip rip events
-----sample output----
06:26:23: RIP: ignored v2 packet from 204.205.5.1 (sourced from one of our
addresses)
06:26:25: RIP: ignored v2 packet from 172.16.40.4 (invalid authentication)
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:32 GMT-3