From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Thu Jun 13 2002 - 00:47:49 GMT-3
I havent seen Darth Reid lab yet, but how about putting a secondary ip
address on R1 & R2 from the same major network 160.100.x.x/24 (you might
need to turn off split horizon, if interfaces between the 2 rtrs are using
igrp)
rgds
Nick
----- Original Message -----
From: <Hemant_Kumar@BERLEX.COM>
To: <ccielab@groupstudy.com>
Sent: Thursday, June 13, 2002 1:10 PM
Subject: redistribution OSFP IGRP, Darth Reid LAB
> hi everyone,
>
> I am having a small problem with Darth Reid LAB Sec V (3).
>
> (160.100.2.0/24)R2 ----igrp
(133.10.201.0/24)----R1---ospf(133.10.200.0/24)
> ----R3---rip (160.100.1.0/24)
>
> E0---R2---FR---R1---FR---R3---E0 both F/R links are multipoint and i
have
> enabled ip split-horizon
> So when i redistributed Rip into ospf at R3, i can see 160.100.1.0/24
route
> at R1. However when i redistribute ospf into igrp at R, i am not able
to
> see 160.100.1.0/24 route. Debug igrp show me that it is sending
> 160.100.0.0/16 route to R2. This is expected as the link between R1 and
R2
> is in different major network.
> At R2 this route will be not be installed as it has 160.100.2.0/24 route
> already.
>
> My question, how can i propagate 16.100.1.0/24 route to R2.
>
> thanking you all inadvance.
>
> Hemant
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:32 GMT-3