From: Michael Popovich (m.popovich@xxxxxxxxx)
Date: Wed Jun 12 2002 - 16:20:15 GMT-3
Here is how I have it setup now.
R5 R6
| |
|---Ethernet--|
|
R7
R5 has FA0/0
R6 has E0
R7 has FA0/0
Here are the configs of each:
R5
interface FastEthernet0/0
bandwidth 100000
ip address 150.50.7.5 255.255.255.128
duplex auto
speed auto
ipx encapsulation SAP
ipx network CC
no ipx route-cache
R6
interface Ethernet0
bandwidth 100000
ip address 150.50.7.6 255.255.255.128
ipx encapsulation SAP
ipx network BB
no ipx route-cache
R7
interface FastEthernet0/0
ip address 150.50.7.7 255.255.255.128
duplex auto
speed auto
ipx encapsulation SAP
ipx network AA
They all have the same encapsulation type but different network numbers. I
have "debug ipx packet" on R5 and R6 and I receive no data after clearing
the ipx routing table.
Any ideas on why??
TIA
MP
----- Original Message -----
From: "MERRILL, JAMES D (AIT)" <jm8752@sbc.com>
To: "'Michael Popovich'" <m.popovich@mchsi.com>; "CCIE GROUPSTUDY"
<ccielab@groupstudy.com>
Sent: Wednesday, June 12, 2002 1:50 PM
Subject: RE: IPX Network detection
> Try setting the Speed and duplex on both routers and the switch they're
> plugged into. I had a problem on my first lab attempt because I let the
> router and switch auto configure. As soon as I set the switch and router
I
> was able to pass traffic.
>
> This problem cost me a bout 2 hours on the lab. I would have left it for
> later in the day but the lab had 80% of the network running across that
ISL
> trunk.
>
> If that doesn't work try doing each encap type on the primary interface
and
> not on sub-interfaces.
>
> -----Original Message-----
> From: Michael Popovich [mailto:m.popovich@mchsi.com]
> Sent: Wednesday, June 12, 2002 11:44 AM
> To: CCIE GROUPSTUDY
> Subject: IPX Network detection
>
> I have heard the solution for this and am testing it in my lab only I am
> unsuccessful.
>
> R7 is the IPX router that I don't know the network number to. Here is the
> config on the FastEthernet interface:
>
> interface FastEthernet0/0
> ip address 150.50.7.7 255.255.255.128
> duplex auto
> speed auto
> ipx encapsulation SNAP
> ipx network AA
>
> R5 is the router that is trying to detect the network number on it's
> Ethernet
> segment:
>
> interface FastEthernet0/0
> bandwidth 100000
> ip address 150.50.7.5 255.255.255.128
> duplex auto
> speed auto
> no ipx route-cache
> !
> interface FastEthernet0/0.1
> ipx network CC
> !
> interface FastEthernet0/0.2
> ipx network DD encapsulation SNAP
> !
> interface FastEthernet0/0.3
> ipx network EE encapsulation ARPA
> !
> interface FastEthernet0/0.4
> ipx network BB encapsulation SAP
>
> I do a "debug ipx packet" and I don't see anything at all. If I "debug ipx
> all" I see SAP and RIP updates but that's it, nothing that tells me the
> correct network number.
>
> Any ideas??
>
> TIA
>
> MP
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:31 GMT-3