From: George Spahl (g.spahl@xxxxxxxxxxxxx)
Date: Sat Jun 08 2002 - 22:11:20 GMT-3
Greetings,
Does anyone know how to use the "distribute-list gateway" command?
Couldn't find much in the way of relevant info on CCO. This was on ver
12.1-15 and under the IGRP router config section.
Thanks,
George
R8-2502A(config-router)#distribute-list ?
<1-199> IP access list number
<1300-2699> IP expanded access list number
WORD Access-list name
gateway Filtering incoming updates based on gateway
prefix Filter prefixes in routing updates
R8-2502A(config-router)#distribute-list gateway ?
WORD Name of an IP prefix-list
R8-2502A(config-router)#distribute-list gateway test ?
in Filter incoming routing updates
out Filter outgoing routing updates
R8-2502A(config-router)#distribute-list gateway test in ?
Null Null interface
Serial Serial
TokenRing IEEE 802.5
<cr>
R8-2502A(config-router)#distribute-list gateway test in s0 ?
<cr>
R8-2502A(config-router)#distribute-list gateway test in s ?
<0-1> Serial interface number
R8-2502A(config-router)#distribute-list gateway test in s 0 ?
<cr>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:29 GMT-3