From: Paul (p_chopin@xxxxxxxxx)
Date: Thu Jun 06 2002 - 19:48:51 GMT-3
I guess I wasn't specific enough on my question.We are
calling from the router with 2 FXS interfaces (phone #
4001,4002)to remote phone # 4000.Only phone #4001
should make a call to 4000 by dialing 4.
Paul
--- Emmanuel Oppong <e-oppong@attbi.com> wrote:
> Paul, you also have to configure "preference". Give
> the call to 4001 a
> preference of 1 and call to 4002 a preference of say
> 10, under dial-peer
> voice x voip command. Then it will always call
> 4001, unless 4001 id down
> for whatever reason. Lower preference is preferred.
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> Paul
> Sent: Thursday, June 06, 2002 12:53 PM
> To: ccielab@groupstudy.com
> Subject: Interesting voice question.
>
>
> Guys,
> I have a router with 2 FXS ports. Lets say assigned
> #
> are 4001 & 4002. On the other end of WAN link there
> is
> router with attached phone #4000.On my router I have
> voip dial-peers pointing to the remote . Now, is
> there
>
> a way to connect to the remot using only phone #
> 4001
> just by dialing 4. I've tried num-exp but it works
> for both phones 4001 & 4002.
> Thanks in advance .
> Paul
>
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:27 GMT-3