From: Paul (p_chopin@xxxxxxxxx)
Date: Fri Jun 07 2002 - 02:05:29 GMT-3
I too believe that command must be applied to voice
port itself not to dial peer.But question is which
command? Is it translation rule? How would you do
that.
Paul
--- Young Brown <lybrown@cisco.com> wrote:
> Hi Paul,
> My study partner and I just went over this and
> believe what you're looking
> for is translation-rule (in global config) and apply
> it to the voice port.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> Paul
> Sent: Thursday, June 06, 2002 3:49 PM
> To: Emmanuel Oppong
> Cc: ccielab@groupstudy.com
> Subject: RE: Interesting voice question.
>
>
> I guess I wasn't specific enough on my question.We
> are
> calling from the router with 2 FXS interfaces (phone
> #
> 4001,4002)to remote phone # 4000.Only phone #4001
> should make a call to 4000 by dialing 4.
> Paul
> --- Emmanuel Oppong <e-oppong@attbi.com> wrote:
> > Paul, you also have to configure "preference".
> Give
> > the call to 4001 a
> > preference of 1 and call to 4002 a preference of
> say
> > 10, under dial-peer
> > voice x voip command. Then it will always call
> > 4001, unless 4001 id down
> > for whatever reason. Lower preference is
> preferred.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com
> > [mailto:nobody@groupstudy.com]On Behalf Of
> > Paul
> > Sent: Thursday, June 06, 2002 12:53 PM
> > To: ccielab@groupstudy.com
> > Subject: Interesting voice question.
> >
> >
> > Guys,
> > I have a router with 2 FXS ports. Lets say
> assigned
> > #
> > are 4001 & 4002. On the other end of WAN link
> there
> > is
> > router with attached phone #4000.On my router I
> have
> > voip dial-peers pointing to the remote . Now, is
> > there
> >
> > a way to connect to the remot using only phone #
> > 4001
> > just by dialing 4. I've tried num-exp but it works
> > for both phones 4001 & 4002.
> > Thanks in advance .
> > Paul
> >
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:27 GMT-3