From: Erhan Kurt (kurt@xxxxxxxxxxxxxxx)
Date: Thu Jun 06 2002 - 10:07:23 GMT-3
Use interface, like below:
Router rip
Distribute-list 10 out e1
Erhan
-----Original Message-----
From: Hung, Sing-Yu [mailto:Sing-Yu.Hung@pccw.com]
Sent: 06 Haziran 2002 Per:embe 15:35
To: ccielab@groupstudy.com
Subject: RE: RIP route distribute
Hi,
If standard access-list, r2 lo0 both not send to r1 and to r3.And I
haven't ideal how to use extended list for distribution.Please help?
Bradford Hung
Pacific Century CyberWorks
-----Original Message-----
From: steven.j.nelson@bt.com [mailto:steven.j.nelson@bt.com]
Sent: Thursday, June 06, 2002 8:11 PM
To: Hung, Sing-Yu; ccielab@groupstudy.com
Subject: RE: RIP route distribute
Distribute list, perhaps ?
-----Original Message-----
From: Hung, Sing-Yu [mailto:Sing-Yu.Hung@pccw.com]
Sent: 06 June 2002 12:56
To: ccielab@groupstudy.com
Subject: RIP route distribute
Dear,
r1----------------rip----------(e0)r2(e1)-----------rip-----------r3
R2 have loop0: 50.0.0.1/24
r2 e0:172.16.11.1/24
r2 e1:172.16.12.1/24
If someone can tell me how to config on r2 such that r2 lo0 is only sand to
r1 and not to r3?
Bradford Hung
Pacific Century CyberWorks
Tel: 288 33125
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:27 GMT-3