From: Martin, Chris (chris@xxxxxxxxxxxx)
Date: Wed Jun 05 2002 - 19:03:56 GMT-3
it looks to me your running IGRP, from what the route table shows, and i
would guess your loopback has a mask that doesnt match your outbound
interface on the router running igrp.
----- Original Message -----
From: "Michael Popovich" <m.popovich@mchsi.com>
To: "CCIE GROUPSTUDY" <ccielab@groupstudy.com>
Sent: Wednesday, June 05, 2002 2:21 PM
Subject: EIGRP Topology Issue
> I have a virtual-template connecting R1 and R2 over frame. On R2 I am
getting
> all the routes via EIGRP and I am redistributing connected with a
route-map to
> limit it to Loopback 0 network. The loopback 0 network on R2 appears in
the
> EIGRP topology of R1 but not in the routing table.
>
> Any ideas?
>
> TIA
>
> MP
>
> r1#sh ip eigrp topology
> IP-EIGRP Topology Table for AS(100)/ID(192.168.100.1)
>
> Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
> r - reply Status, s - sia Status
>
> P 10.2.2.0/24, 1 successors, FD is 22688000
> via 172.150.2.2 (22688000/128256), Virtual-Access1
> P 10.0.0.0/24, 1 successors, FD is 40640000
> via Redistributed (40640000/0)
> P 10.1.1.0/24, 1 successors, FD is 128256
> via Redistributed (128256/0)
> P 10.20.20.0/24, 1 successors, FD is 40512000
> via Redistributed (40512000/0)
> P 192.168.100.0/24, 1 successors, FD is 128256
> via Redistributed (128256/0)
> P 172.150.8.0/24, 1 successors, FD is 40537600
> via Redistributed (40537600/0)
> P 172.150.2.0/24, 1 successors, FD is 22560000
> via Connected, Virtual-Access1
> P 172.150.2.2/32, 1 successors, FD is 22560000
> via Rconnected (22560000/0)
> P 172.150.1.0/24, 1 successors, FD is 40512000
> via Redistributed (40512000/0)
>
> R1 routing table:
>
> r1#si
>
> Gateway of last resort is not set
>
> 172.150.0.0/16 is variably subnetted, 4 subnets, 2 masks
> I 172.150.8.0/24 [100/158350] via 172.150.1.5, 00:01:24, Serial0
> C 172.150.1.0/24 is directly connected, Serial0
> 10.0.0.0/24 is subnetted, 4 subnets
> I 10.0.0.0 [100/158750] via 172.150.1.5, 00:01:24, Serial0
> C 10.20.20.0 is directly connected, Serial0
> C 10.1.1.0 is directly connected, Loopback0
> C 192.168.1.0/24 is directly connected, Ethernet0
> C 192.168.100.0/24 is directly connected, Loopback1
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:25 GMT-3