From: Kumar Dasari (kdgroup@xxxxxxxxxxxxxxxx)
Date: Tue Jun 04 2002 - 21:07:30 GMT-3
John:
isdn incoming-voice modem on the physical interface (S1/0:15)
and
matching ppp auth methods on both the physical and logical interfaces
(group-async) should do.
But it looks like you have done this already.
turn on dubug ppp neg, debug ppp auth, debug ppp error and make an isdn
call
and see what the output is.
You can post the output here if you need some help interpreting it.
Are you sure that there is no config problem from the side that is dialing
in?
KD
> ----- Original Message -----
> From: "Denise Donohue" <denise@dtxnet.com>
> To: "'Jonathan Hays'" <jhays@jtan.com>; "'Graham, John'"
> <john.graham@cgey.com>; <ccielab@groupstudy.com>
> Sent: Monday, June 03, 2002 2:36 PM
> Subject: RE: ISDN PRI, dial up users and digital modems
>
>
> > If you decide to throw that 3640 out the window, would you please let me
> > know? I'd like to be standing there to catch it! :-)
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > Jonathan Hays
> > Sent: Tuesday, June 04, 2002 12:56 PM
> > To: 'Graham, John'; ccielab@groupstudy.com
> > Subject: RE: ISDN PRI, dial up users and digital modems
> >
> >
> > Hi John,
> >
> > When you ask for detailed help on a specific problem like this, it would
> > be VERY helpful to the rest of us if you post your configuration file.
> > Taking a few minutes to do this (and if necessary, to do a global change
> > on IP addresses) will save all of us a lot of wild guessing....
> >
> > Jonathan
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Graham, John
> > Sent: Friday, May 17, 2002 1:05 AM
> > To: 'ccielab@groupstudy.com'
> > Subject: ISDN PRI, dial up users and digital modems
> >
> >
> > Hi,
> >
> > I am trying to get both ISDN and 56k users to be able to dial into the
> > channelized E1 interface on a 3640 and authenticate via radius.
> >
> > The config works because the 56k users can, but when and ISDN user tries
> > to authenticate there is a ppp error and the connection is dropped.
> >
> > I have put the "ISDN incoming-voice modem" command in and then tried
> > "ISDN incoming-voice data" on the S1/0:15 int. Neither made a
> > difference.
> >
> > Does anyone have experience of this ? A working config would be greatly
> > appreciated.
> >
> > I am using IP unnumbered on the E1 and a group-async interface.
> >
> > I would be greatful for any help because I am getting close to throwing
> > the 3640 out of the window.
> >
> >
> > ************************************************************************
> > ********************
> > " This message contains information that may be privileged or
> > confidential and
> > is the property of the Cap Gemini Ernst & Young Group. It is intended
> > only for
> > the person to whom it is addressed. If you are not the intended
> > recipient, you
> > are not authorized to read, print, retain, copy, disseminate,
> > distribute, or use
> > this message or any part thereof. If you receive this message in error,
> > please
> > notify the sender immediately and delete all copies of this message ".
> > ************************************************************************
> > ********************
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:24 GMT-3