From: jfaure@xxxxxxxxxx
Date: Tue Jun 04 2002 - 10:56:02 GMT-3
Hi Bola:
I tested thiat you said (to do a summary of the ospf external 2 route and
redistribute that summary, but didn't work. The only way I know for the
moment to do so is using "ip default network" command.
Regards
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
"Bola
Adegbonmire" Para: <jfaure@sztele.com>
<BolaAD@Resource cc: <ccielab@groupstudy.com>
ry.com.ng> Asunto: RE: ROUTE INJECTION TO A CLA
SSFULL
PROTOCOL FROM A CLASSLESS ONE
04/06/02 13:36
I believe because this route arrives in R5 the OSPF-IGRP red router as
E2 type, it will allow you to do summary-address 150.100.1.0/24 and
consequetly pass it on to the IGRP domain, which only has subnet
150.100.2.0/24 . Why did you not try this? Although it will also pass it
on to R2 and you will probably have to filter this route, if you do not
want this undesirable route.Though the route is to Null 0 in R5.
Am I missing anything in your topology?
Why would you not be able to pass it on to igrp domain?
-----Original Message-----
From: jfaure@sztele.com [mailto:jfaure@sztele.com]
Sent: Monday, June 03, 2002 9:13 AM
To: Cheol
Cc: ccielab@groupstudy.com
Subject: Re: ROUTE INJECTION TO A CLASSFULL PROTOCOL FROM A CLASSLESS
ONE
Yes, when I redistribute from IGRP to OSPF I use the "subnets" option
obviously. The problem, as I said in the first mail, is the
redistribution from OSPF to IGRP: although I've the 150.100.1.0/24 ospf
external type 2 route in the R5 table, I can't pass it to the R6 router
(this router only speaks IGRP, the R5 speakes OSPF and IGRP).
Regards.
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
------------------------------------------------------------------------
----SOLUZIONA TELECOMUNICACIONES Servicios Profesionales de UNION FENOSA Jerez, 3 28016 MADRID tel 91 579 30 00 fax 91 350 72 83 ------------------------------------------------------------------------ ---
"Cheol"
<netp@enclue.c Para: <jfaure@sztele.com>
om> cc: <ccielab@groupstudy.com> Asunto: Re: ROUTE INJECTION TO A CLASSFULL 03/06/02 09:56 PROTOCOL FROM A CLASSLESS ONE
Do you put into the router configuration as keyword "redistribute igrp x x x x subnet"?
May be make it that you want!!!
=================== =============================================================== (?) ??? ??? ???? ???? 13-25 ???? 203? ??: 02-784-0957~8 ??: 02-784-0959 ? ? ?(???? Network Engineer) ???: 016-263-1632 =============================================================== ----- Original Message ----- From: <jfaure@sztele.com> To: <ccielab@groupstudy.com> Sent: Sunday, June 02, 2002 6:30 AM Subject: ROUTE INJECTION TO A CLASSFULL PROTOCOL FROM A CLASSLESS ONE
> Hi Guys! > > > I would like to inject to an IGRP domain a route from an OSPF domain. This > is my scenario: > > > ROUTERS: R6------------------R5 > --------------------------R2-------------------(EIGRP Network) > > R. PROTOCOL IGRP IGRP-OSPF > EIGRP-OSPF > > > R5 is redistributing OSPF to IGRP and IGRP to OSPF. R2 is doing the > same with EIGRP and OSPF. The network I want to pass to R6 is a > network that appears in the R5 routing table as an external type 2 > OSPF network (because > it comes from the previous EIGRP domain) The problem is that the R6 router > has a directed connected network of the same classfull address that > the route I wan to advertise to it. This is, I want to pass the > network 150.100.1.0/24 (from OSPF, from R5) to R6, but one of the > network interfaces of R6 has the address 150.100.2.1/24, then it > appears in R6 as directly connected. > > Do you know how can I achieve this? I've tried several thinghs, but I can't > pass any 150.100.0.0 IGRP entry to the router table of R6 that points > to R5. > > Regards > > > > > Juan Faure Ferrer > email: jfaure@sztele.com > > Lmnea de Negocio de Telematica y CC > Ingeniero de Integracisn de Redes y Sistemas > ------------------------------------------------------------------------ ----
> > SOLUZIONA TELECOMUNICACIONES > Servicios Profesionales de UNION FENOSA > Jerez, 3 > 28016 MADRID > tel 91 579 30 00 fax 91 350 72 83 > ------------------------------------------------------------------------ ---
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:23 GMT-3