From: Christopher M. Heffner (cheffner@xxxxxxxxxxxxxxxxxx)
Date: Sun Jun 02 2002 - 02:42:02 GMT-3
I had 2 - 2500 series routers that lost there power supplies due to
stacking one on top of the other. There were 8 or 9 of them stacked on
top of each other at the time. Definitely need spacing between them or
risk losing the power supplies.
Now I have an APC rack.
========================================================================
==========
Christopher M. Heffner
Strategic Network Solutions, Inc.
Cisco IMCR Course Director
CCIE, CCSI, MCT, MCSE, MCNI, MCNE, CLI, PCLP, FCSE, ASE, CTT, A+
cheffner@certified-labs.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
cash2001
Sent: Thursday, May 30, 2002 4:56 PM
To: ccielab@groupstudy.com
Subject: router rack materials
I recently purchased 6 routers and have them stack one on top the other.
5 are 2501's with the ventilation on the bottom. Aside from placing
them in a rack, would spacers between each router suffice for proper
ventilation? Also, where would one obtain the mini rack to hold 6
routers?
This archive was generated by hypermail 2.1.4 : Tue Jul 02 2002 - 08:12:20 GMT-3