From: Roberts, Larry (Larry.Roberts@xxxxxxxxxxxx)
Date: Wed May 29 2002 - 12:48:11 GMT-3
Jason,
I ran into a similar problem with a 3640 and a 2FE2W.
I finally found that the 12.2.1 LD release ( IP PLUS 3DES for me ) worked.
It does some special diagnostics on bootup ( I have never seen them before )
to query the card.
I tried everything from the newest 12.2 release to some 12.0 releases and
this was the only one that I found worked. Im sure there are others, but I
was tired of:
Copy tftp flash:1:
Good luck and happy hunting..!
Thanks
Larry
-----Original Message-----
From: Jason Wong [mailto:jason1@v-labs.net]
Sent: Wednesday, May 29, 2002 10:07 AM
To: ccielab@groupstudy.com
Subject: Re: Hardware problem
I'm aware of the IOS issues and issues with 2600 after searching on CCO but
this isn't my real problem since I'm running it on a 3660 with 12.xT
----- Original Message -----
From: "Dimitris Vassilopoulos" <Dimitris.Vassilopoulos@eurodyn.com>
To: "Jason Wong" <jason1@v-labs.net>
Cc: <ccielab@groupstudy.com>
Sent: Wednesday, May 29, 2002 10:43 PM
Subject: Re: Hardware problem
> Jason,
>
> Here are the Supported Platforms & Minimum IOS Versions related to
> NM-1E1R2W....
>
> 3700 Series - 12.2(8)T
> 3660 series - 12.0(5)T
> 3640 - 11.1(8)AA
> 3620 - 11.1(8)AA
> 2691 - 12.2(8)T1
> 2650 - Not Available
> 2600XM Series - 12.2(8)T1
> 2600 series - Not Available
> 1720 - Not Available
> 1600 series - Not Available
>
> I found that info under Cisco CO..... It's not hardware related
> problem...
>
> Hope that answers your question...
>
> Cya
>
> Dimitris Vassilopoulos
> Network Engineer(CCNP, Security Field Engineer)
> European Dynamics S.A.
> --------------------------------------------------
> You don't have to be old to be wise...
> --------------------------------------------------
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:11 GMT-3