Re: Hardware problem

From: Jason Wong (jason1@xxxxxxxxxx)
Date: Wed May 29 2002 - 07:36:53 GMT-3

• Next message: postmaster: "Returned mail--"to open ""
• Previous message: Nigel Roy: "Re: using LOAD for IGRP"
• Maybe in reply to: Jason Wong: "Hardware problem"
• Next in thread: jeff gercken: "Re: Hardware problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Without doing anything, the following message appears...

00:19:35: %OIR-6-REMCARD: Card removed from slot 3, interfaces disabled
00:19:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet3/0,
changed s
tate to down
00:19:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface TokenRing3/0,
changed
state to down

----- Original Message -----
From: "Jason Wong" <jason1@v-labs.net>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 29, 2002 5:28 PM
Subject: Hardware problem

> I have a 3660 with a 1E1R2W and this card is intermitten during boot up,
> sometimes detected , sometimes missing after booting.. But if I do a OIR ,
> it will redetects fine.. But a power restart sometimes doesn't solve the
> problem.. only if I do a OIR and reinsert the module while power on..
>
> Anybody encounter something similar..

• Next message: postmaster: "Returned mail--"to open ""
• Previous message: Nigel Roy: "Re: using LOAD for IGRP"
• Maybe in reply to: Jason Wong: "Hardware problem"
• Next in thread: jeff gercken: "Re: Hardware problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:11 GMT-3