From: jeff gercken (jeffgercken@xxxxxxxxxxx)
Date: Wed May 29 2002 - 09:11:24 GMT-3
What happens if you put the NM in another slot? What IOS are you running?
Bootstrap version?
>From: "Jason Wong" <jason1@v-labs.net>
>Reply-To: "Jason Wong" <jason1@v-labs.net>
>To: <ccielab@groupstudy.com>
>Subject: Re: Hardware problem
>Date: Wed, 29 May 2002 18:36:53 +0800
>
>Without doing anything, the following message appears...
>
>
>00:19:35: %OIR-6-REMCARD: Card removed from slot 3, interfaces disabled
>00:19:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet3/0,
>changed s
>tate to down
>00:19:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface TokenRing3/0,
>changed
>state to down
>
>----- Original Message -----
>From: "Jason Wong" <jason1@v-labs.net>
>To: <ccielab@groupstudy.com>
>Sent: Wednesday, May 29, 2002 5:28 PM
>Subject: Hardware problem
>
>
> > I have a 3660 with a 1E1R2W and this card is intermitten during boot up,
> > sometimes detected , sometimes missing after booting.. But if I do a OIR
>,
> > it will redetects fine.. But a power restart sometimes doesn't solve the
> > problem.. only if I do a OIR and reinsert the module while power on..
> >
> > Anybody encounter something similar..
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:11 GMT-3