From: Joe Morabito (joe.morabito@xxxxxxx)
Date: Wed May 29 2002 - 04:36:57 GMT-3
Thanks,
I understand this a lot better now.
-Joe
----- Original Message -----
From: "Nick Shah" <nshah@connect.com.au>
To: "Joe Morabito" <joe.morabito@cox.net>; <ccielab@groupstudy.com>
Sent: Wednesday, May 29, 2002 12:46 AM
Subject: Re: ipx eigrp timers
> Joe,
>
> What I have read is that it displays "hold time left " so, at no time you
> should see it higher than your configured hold time...
>
> So for eg. you have configged hold time as 30, then any figure less than
30
> is fine (of course you shouldnt see less than 15 all the time, that means
> the hold time is not working as expected).
>
> The other curly aspect about hold time that I wasnt able to resolve was
that
> eventhough CCO says that if the hold time is less than 3 times of hello
> interval, the hold time is automatically adjusted, it doesnt work that
way.
> You have to explicitly specify hello interval, and then also modify hold
> time.
>
> Thanks
> Nick
> ----- Original Message -----
> From: "Joe Morabito" <joe.morabito@cox.net>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, May 29, 2002 1:30 PM
> Subject: Re: ipx eigrp timers
>
>
> > I did see that, but the hold time keeps changing. If I do a show ipx
> eigrp
> > nei I get 14 secs, then I do it again and I get 10 secs, it changes but
> will
> > always be in a small range. Is this normal?
> >
> > Thanks.
> >
> > -Joe
> >
> > ----- Original Message -----
> > From: "Nick Shah" <nshah@connect.com.au>
> > To: "Joe Morabito" <joe.morabito@cox.net>; <ccielab@groupstudy.com>
> > Sent: Tuesday, May 28, 2002 11:18 PM
> > Subject: Re: ipx eigrp timers
> >
> >
> > > Joe,
> > >
> > > Show ipx eigrp neighbors
> > > shows you the hold time.
> > >
> > > I think there is no command to test the hello interval though.
> > >
> > > Thanks
> > > Nick
> > > ----- Original Message -----
> > > From: "Joe Morabito" <joe.morabito@cox.net>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Wednesday, May 29, 2002 12:38 PM
> > > Subject: ipx eigrp timers
> > >
> > >
> > > > I am working on some the quirky things I might see in the lab.
There
> > was
> > > a
> > > > thread that discusses ipx eigrp timers, etc. I made some changes,
but
> > can
> > > not
> > > > find the command to show the ipx eigrp hello interval (even when
> > changed)
> > > or
> > > > the ipx eigrp hold timer (even when changed).
> > > >
> > > > It is late so maybe I missed something, but I tried just about
every
> > show
> > > > command for show ipx ...
> > > >
> > > > Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:11 GMT-3