From: Dang Quang Minh (minhdq@xxxxxxxxxxxxx)
Date: Mon May 27 2002 - 23:32:34 GMT-3
Hi,
I usually use "no fair-queue" and "async mode dedicated" for the Async65
interface. It works.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
chenyan
Sent: Sunday, May 26, 2002 12:24 PM
To: ccielab
Subject: aux-aux problem?
hi,two router connected with two external modems through aux, we can
initate a connect from only one fixed modem and ping each other,but when
i initate an connect from other side, i can see the async interface up
but the line protocol is not up and the ping is time out ,and after
several seconds (not because os the idle-timeout) the line is down.
The configuration is following.
hostname R1
!
enable password cisco
!
username R3 password 0 test
!
!
!
!
ip subnet-zero
no ip finger
no ip domain-lookup
!
!
!
!
!
interface Ethernet0/0
ip address 68.44.16.253 255.255.248.0
no keepalive
!
interface Serial0/0
no ip address
shutdown
!
interface Ethernet0/1
no ip address
!
interface Serial0/1
no ip address
shutdown
!
interface Serial0/2
no ip address
!
interface Async65
no ip address
encapsulation ppp
dialer in-band
dialer rotary-group 0
async default routing
async mode interactive
no peer default ip address
no cdp enable
ppp authentication chap pap
!
interface Dialer0
ip address 192.168.12.2 255.255.255.0
encapsulation ppp
dialer in-band
dialer idle-timeout 60
dialer map ip 192.168.12.1 name R3 broadcast 1496
dialer-group 1
ppp authentication chap pap
!
ip classless
ip http server
!
dialer-list 1 protocol ip permit
alias exec si show ip route
!
line con 0
transport input none
line aux 0
autoselect ppp
modem InOut
modem autoconfigure discovery
transport input all
speed 115200
flowcontrol hardware
line vty 0 4
password cisco
login
!
no scheduler allocate
end
----------------------
hostname R3
!
!
username R1 password 0 test
!
!
!
!
ip subnet-zero
no ip finger
!
!
!
!
!
!
interface Ethernet0/0
ip address 200.200.200.199 255.255.255.0
!
interface Serial0/0
no ip address
shutdown
!
interface Async65
no ip address
encapsulation ppp
dialer in-band
dialer rotary-group 0
async default routing
async mode interactive
no cdp enable
ppp authentication chap pap
!
interface Dialer0
ip address 192.168.12.1 255.255.255.0
encapsulation ppp
dialer in-band
dialer idle-timeout 60
dialer map ip 192.168.12.2 name R1 broadcast 1509
dialer-group 1
ppp authentication chap pap
!
ip classless
ip http server
!
dialer-list 1 protocol ip permit
!
line con 0
transport input none
line aux 0
autoselect ppp
modem InOut
modem autoconfigure discovery
transport input all
speed 115200
line vty 0 4
login
!
end
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:10 GMT-3