Re: How to route udp packets from ethernet to serial intf

From: Danny.Wang@xxxxxxxxxxxxxx
Date: Fri May 24 2002 - 15:09:04 GMT-3

• Next message: Johan Strandloof: "Re: Work-around on using null interface"
• Previous message: Sam Pilot: "Re: Saudi job"
• Maybe in reply to: Ajit Das: "How to route udp packets from ethernet to serial intf"
• Next in thread: Harish DV/peakxv: "Re: How to route udp packets from ethernet to serial intf"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
ip forward-protocol udp xxx

int e0:
ip broadcast-address x.x.x.x

ip policy routing:

match ip address xxx
set int serial x

                      Ajit Das

                      <ajidas@cisco.com To: CCIElab@groupstudy.com

> cc:

                      Sent by: Subject: How to route udp packe
ts from ethernet to serial
                      nobody@groupstudy intf

                      .com

                      05/24/2002 10:16

                      AM

                      Please respond to

                      Ajit Das

Hi folks,

Can someone tell me how to route udp broadcast packets from ethernet
port to serial intf.

Thanks

• Next message: Johan Strandloof: "Re: Work-around on using null interface"
• Previous message: Sam Pilot: "Re: Saudi job"
• Maybe in reply to: Ajit Das: "How to route udp packets from ethernet to serial intf"
• Next in thread: Harish DV/peakxv: "Re: How to route udp packets from ethernet to serial intf"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:08 GMT-3