From: David Luu (wicked01@xxxxxxxxxxxxx)
Date: Thu May 23 2002 - 01:38:14 GMT-3
just do a passive-interface on the bri
At 09:23 PM 5/22/2002 -0700, Jeongwoo Park wrote:
>But I am stilling getting little bit different output after I put
>access-list like below;
>
>access-list 100 deny ospf any any
>access-list 100 deny ip any host 224.0.0.9
>access-list 100 permit ip any any
>dialer-list 1 protocol ip list 100
>
>output of debug dialer; this time I am getting this with more interval.
>R5#
>1d08h: BR0 DDR: rotor dialout [priority]
>1d08h: BR0 DDR: Dialing cause ip (s=170.100.2.1, d=255.255.255.255)
>1d08h: BR0 DDR: Attempting to dial 8358661
>1d08h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
>1d08h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
>1d08h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
>1d08h: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358661 R3,
>call
>lasted 1 seconds
>1d08h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
>1d08h: BR0 DDR: has total 2 call(s), dial_out 0, dial_in 0
>1d08h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
>1d08h: BR0:1 DDR: disconnecting call
>
>
>
>-----Original Message-----
>From: Jeongwoo Park [mailto:jpark@wams.com]
>Sent: Wednesday, May 22, 2002 8:51 PM
>To: 'David Luu'; 'ccielab@groupstudy.com'
>Subject: RE: ISDN flapping !!
>
>Yes
>-----Original Message-----
>From: David Luu [mailto:wicked01@ix.netcom.com]
>Sent: Wednesday, May 22, 2002 8:34 PM
>To: Jeongwoo Park; 'ccielab@groupstudy.com'
>Subject: RE: ISDN flapping !!
>
>ah i see whats happening now....
>if you look at the destination ip for the dial cause, the ip is 224.0.0.9,
>which is the multicast address for RIPv2...
>and if you look at your previous debug you will notice that the line was
>brought up around every 30 seconds, which is the update interval for
>RIPv2...
>
>are you running RIPv2 on the router?
>
>At 08:21 PM 5/22/2002 -0700, Jeongwoo Park wrote:
> >This is what I got after deb dialer
> >It is still flapping
> >
> >JP
> >R5#
> >1d07h: BR0 DDR: rotor dialout [priority]
> >1d07h: BR0 DDR: Dialing cause ip (s=170.100.2.1, d=224.0.0.9)
> >1d07h: BR0 DDR: Attempting to dial 8358661
> >1d07h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> >1d07h: %DIALER-6-BIND: Interface BR0:1 bound to profile Di1
> >1d07h: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358661
> >1d07h: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 8358661 R3,
> >call
> >lasted 1 seconds
> >1d07h: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> >1d07h: BR0 DDR: has total 2 call(s), dial_out 0, dial_in 0
> >1d07h: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di1
> >1d07h: BR0:1 DDR: disconnecting call
> >
> >-----Original Message-----
> >From: David Luu [mailto:wicked01@ix.netcom.com]
> >Sent: Wednesday, May 22, 2002 8:13 PM
> >To: Jeongwoo Park; 'ccielab@groupstudy.com'
> >Subject: Re: ISDN flapping !!
> >
> >do a show dialer, and see what the reason is for the line being brought up
> >
> >At 07:11 PM 5/22/2002 -0700, Jeongwoo Park wrote:
> > >Hi guys, Help !!
> > >Look at this logs
> > >00:19:35: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> > >00:19:35: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
> > >00:19:36: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> > >00:20:03: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> > >00:20:03: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
> > >00:20:04: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> > >00:20:31: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
> > >00:20:31: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 8358662
> > >00:20:31: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
> > >
> > >Yeah, definitely idsn line is flapping.
> > >Here is my config
> > >R3---------R5
> > >
> > >R3;
> > >Username R5 password 0 cisco
> > >
> > >interface BRI0
> > >no ip address
> > >no ip directed-broadcast
> > >encapsulation ppp
> > >ip ospf interface-retry 0
> > >ip ospf demand-circuit
> > >dialer pool-member 1
> > >isdn switch-type basic-ni
> > >isdn spid1 0835866101 8358661
> > >isdn spid2 0835866301 8358663
> > >ppp authentication chap
> > >ppp multilink
> > >!
> > >interface Dialer1
> > >ip address 170.100.2.6 255.255.255.0
> > >no ip directed-broadcast
> > >encapsulation ppp
> > >ip ospf interface-retry 0
> > >dialer in-band
> > >dialer string 8358662
> > >dialer string 8358664
> > >ppp authentication chap
> > >ppp multilink
> > >!
> > >dialer-list 1 protocol ip permit
> > >
> > >R5;
> > >Username R3 password 0 cisco
> > >
> > >interface BRI0
> > >no ip address
> > >no ip directed-broadcast
> > >encapsulation ppp
> > >dialer pool-member 1
> > >isdn switch-type basic-ni
> > >isdn spid1 0835866201 8358662
> > >isdn spid2 0835866401 8358664
> > >ppp authentication chap
> > >ppp multilink
> > >!
> > >interface Dialer1
> > >ip address 170.100.2.1 255.255.255.0
> > >no ip directed-broadcast
> > >encapsulation ppp
> > >dialer remote-name R3
> > >dialer string 8358661
> > >dialer string 8358663
> > >dialer pool 1
> > >dialer-group 1
> > >ppp authentication chap
> > >ppp multilink
> > >!
> > >dialer-list 1 ip protocol permit
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:05 GMT-3