From: Church, Chuck (cchurch@xxxxxxxx)
Date: Mon May 20 2002 - 14:49:58 GMT-3
Jason,
Why would you want to make a trunk portfast? The only reasons I
know of where it's needed are for IP DHCP and IPX frame and network
negotiation. If you had a trunk going to a server with a trunk-capable NIC
that didn't have hard-coded IP or IPX information, then you might want to
use trunking with portfast, but I think that'd be a real odd configuration.
What exactly are you trying to do?
Chuck Church
Sr. Network Engineer
CCIE #8776, MCNE, MCSE
US Tennis Association
70 W. Red Oak Lane
White Plains, NY 10604
914-696-7199
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Saleem Rahman
Sent: Monday, May 20, 2002 11:39 AM
To: Ian.C.Stong@mail.sprint.com; Jian Hua Li
Cc: ccielab@groupstudy.com
Subject: RE: can portfast run on a trunk port?
Portfast support on trunk is available starting from CatOS 7.1(1) for Cat6k.
Kind Regards,
Saleem Rahman, CCIE # 9062
Network Consulting Engineer, Cisco Systems,
Advance Network Services Dept, Pegasus Park,
E-mail: salrahma@cisco.com De Kleetlaan 6A,
Phone : +32 2 704 6193, 1831 Diegem,
Mobile : +32 478681382, Brussels,
Fax: : +32 2 704 6000. Belgium.
-----Original Message-----
From: Ian.C.Stong@mail.sprint.com [mailto:Ian.C.Stong@mail.sprint.com]
Sent: 20 May 2002 16:03
To: ccielab@groupstudy.com; Jian Hua Li
Subject: RE: can portfast run on a trunk port?
I don't believe so. I seem to recall on my Cat 5k that when you set a
port to portfast it even comes back and tells you it's disabling
trunking for that port (even if it's not a trunk port it returns that
message). Easy enough to test.
Ian
-----Original Message-----
From: jasonli [mailto:jasonli@cisco.com]
Sent: Monday, May 20, 2002 6:27 AM
To: ccielab
Subject: can portfast run on a trunk port?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:02 GMT-3