From: Tony Hong (aamercado31@xxxxxxxxx)
Date: Mon May 20 2002 - 13:52:44 GMT-3
HI
PortFast should be used only when connecting a single
end station to a switch port. If you enable PortFast
on a port connected to another networking device, such
as a switch, you can create network loops.
SEE:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/config/stp_
enha.htm
HTH
--- Ian.C.Stong@mail.sprint.com wrote:
> I don't believe so. I seem to recall on my Cat 5k
> that when you set a
> port to portfast it even comes back and tells you
> it's disabling
> trunking for that port (even if it's not a trunk
> port it returns that
> message). Easy enough to test.
>
>
> Ian
>
>
> -----Original Message-----
> From: jasonli [mailto:jasonli@cisco.com]
> Sent: Monday, May 20, 2002 6:27 AM
> To: ccielab
> Subject: can portfast run on a trunk port?
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:02 GMT-3