From: Davis, David (DDavis@xxxxxxxxxx)
Date: Fri May 17 2002 - 17:36:00 GMT-3
Michael,
Thanks for your help.
I know with OSPF everything has to have a connection to area 0.
In this configuration, is it okay that area 0 shows inactive? Or is the fact th
at area 0 is inactive telling me that I need to "fix" something?
If I had some trouble with route redistribution, I would know that I need to fi
x something but, as far as I can tell, it seems to work.
Thanks,
David
-----Original Message-----
From: Michael Canfield [mailto:ccnpccdp@hotmail.com]
Sent: Friday, May 17, 2002 3:18 PM
To: Davis, David; ca_vices@indiatimes.com
Cc: ccielab@groupstudy.com
Subject: RE: RE: area 0 inactive - okay?
Your R6 config shows no networks assigned to area 0, thats why area 0 shows
inactive on R6
>router ospf 1
>log-adjacency-changes
>area 0 authentication message-digest
>redistribute rip metric 20 metric-type 1 subnets route-map fromrip
>network 150.10.6.6 0.0.0.0 area 5
>network 150.10.60.0 0.0.0.255 area 5
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:59:00 GMT-3