From: Ali (muali_cisco@xxxxxxxxxxx)
Date: Fri May 17 2002 - 03:39:05 GMT-3
Loopback is treated as STUB, and area 0 can't be stub. Maybe that's your
problem.
Ali
----- Original Message -----
From: <ccie2b@cox.net>
To: <ccielab@groupstudy.com>
Sent: Thursday, May 16, 2002 10:38 PM
Subject: OSPF - Backbone area inactive
> Guys,
>
> I have a simple ospf config:
>
> int lo0
> ip add 10.1.1.1 255.255.255.255
>
> int fa3/1
> ip add 11.1.1.1 255.255.255.252
>
> router ospf 100
> net 10.1.1.1 0.0.0.0 area 0
> net 11.1.1.1 0.0.0.0 area 1
>
> I can see ospf running on my neighbor.
> I can see the adjacent neighbor.
> The neighbor has me as an adjacenty.
> Area 0 is inactive...
>
> How could the adjacency form, routes are being seen but area 0 is showing
as inactive. This is a broadcast network...
>
> TIA
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3