From: ccie2b@xxxxxxx
Date: Fri May 17 2002 - 02:38:43 GMT-3
Guys,
I have a simple ospf config:
int lo0
ip add 10.1.1.1 255.255.255.255
int fa3/1
ip add 11.1.1.1 255.255.255.252
router ospf 100
net 10.1.1.1 0.0.0.0 area 0
net 11.1.1.1 0.0.0.0 area 1
I can see ospf running on my neighbor.
I can see the adjacent neighbor.
The neighbor has me as an adjacenty.
Area 0 is inactive...
How could the adjacency form, routes are being seen but area 0 is showing as in
active. This is a broadcast network...
TIA
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3