From: Taimoor Husain (taimoor@xxxxxxxxx)
Date: Thu May 16 2002 - 20:35:16 GMT-3
Also something to add is that on the command ip rsvp bandwidth, the first
parameter is the total that voice calls can reserve and the second is the
maximum that each voice call (flow) can reserve. THe dial peer
configurations are correct but you need to make sure that the voip
dial-peers on both sides are configured for rsvp. Take into consideration
that rsvp cannot consider RTP header compression at this time. Also make
sure that you have call rsvp-sync command under global config.
Regards,
----------------------------------------------------------------------------
----
:|: :|: Taimoor Husain
:| | |: :| | |: CCIE # 9315
.:| | | | | | |:. .:| | | | | | |:. taimoor@cisco.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3