From: Jason (jgraun@xxxxxxxxx)
Date: Thu May 16 2002 - 20:30:52 GMT-3
Thanks
-----Original Message-----
From: Logan, Harold [mailto:loganh@mccfl.edu]
Sent: Thursday, May 16, 2002 8:11 AM
To: jgraun@attbi.com; ccielab@groupstudy.com
Subject: RE: RARPing on a Cat IOS switch
If you don't have a network management platform or adequate
documentation to consult, there's one other option you have. Since the
switch's sc0 is on a separate subnet, you'll have to do it from a
workstation on the same subnet. Ping the broadcast address of the
subnet, then drop to a command prompt and view the workstation's arp
table (arp -a on a windows box). You can either look through the list
yourself, or copy and paste it into a text file and do a search for the
mac you're looking for. You can probably also do this from a router that
has that subnet attached (I never have myself, but I can't see why it
wouldn't work) but you'll have to enable directed broadcasts first using
ip directed-broadcast on the LAN interface.
If that seems like a lot of work, it is. That's why organizations pay a
grand or more for network management software.
hth,
Hal
> -----Original Message-----
> From: jgraun@attbi.com [mailto:jgraun@attbi.com]
> Sent: Wednesday, May 15, 2002 4:52 PM
> To: ccielab@groupstudy.com
> Subject: RARPing on a Cat IOS switch
>
>
> Does anybody know how to get the IP address of a device
> plugged directly into the switch if all I have is the
> mac address?
>
> Thanks
>
> Jason
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3