From: Tom Young (gitsyoung@xxxxxxxxxxx)
Date: Thu May 16 2002 - 04:42:49 GMT-3
Hi, everybody:
I solved the problem !! It is should be:
ppp auth pap chap DAILIN
I need to write the DAILIN to receive the reply of
authenitcation message !
And thanks for so much friends message, Thanks alot
Young
--- Tom Young <gitsyoung@yahoo.co.jp> $B$+$i$N%a%C%;!<%8(B $B!'(B
> Hi, CCIEers:
>
> I set my Cisco813 for dialup connection, but the
> bri0
> always couldn't be actived, I don't know what's
> wrong, who
> can teach me?
>
> Thanks alot
> Young
>
> -----configuration------------
>
>
> TANAKA#sh ru
> Building configuration...
>
> Current configuration : 916 bytes
> !
> version 12.2
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname TANAKA
> !
> enable secret 5 $1$vcqd$JOiRp36G5vsh9AnVH60tc.
> enable password JBCC
> !
> !
> ip subnet-zero
> !
> no ip domain-lookup
> isdn switch-type ntt
> !
> !
> !
> interface Ethernet0
> ip address 172.16.0.254 255.255.0.0
> ip nat inside
> !
> interface BRI0
> ip address negotiated
> ip nat outside
> encapsulation ppp
> no keepalive
> dialer idle-timeout 60
> dialer string 0282201916
> dialer-group 1
> isdn switch-type ntt
> ppp authentication pap
> ppp chap hostname x58kcssg
> ppp chap password 7 151C1104057C78
> ppp pap sent-username x58kcssg password 7
> 130B0D1A0A5A57
> !
> ip nat inside source list 1 interface BRI0 overload
> no ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 BRI0 permanent
> !
> access-list 1 permit any
> --More--
> 04:34:39: BR0 DDR: cdp, 282 bytes, outgoing
> uninteresting
> (no list matched)
> 04:34:39: BR0 DDR: sending broadcast to default
> destination -- failed, not conne
> dialer-list 1 protocol ip permit
> !
> line con 0
> line vty 0 4
> password JBCC
> login
> !
> !
> end
>
> -----debug message---------------
>
> 04:35:28: BR0 DDR: ip (s=172.16.0.22,
> d=203.139.161.40),
> 62 bytes, outgoing inte
> resting (ip PERMIT)
> 04:35:28: BR0 DDR: Dialing cause ip (s=172.16.0.22,
> d=203.139.161.40)
> 04:35:28: BR0 DDR: Attempting to dial 0282201916
> 04:35:28: ISDN BR0: Outgoing call id = 0x800F, dsl 0
> 04:35:120259084288: ISDN BR0: Event: Call to
> 0282201916 at
> 64 Kb/s
> 04:35:120266548788: ISDN BR0: process_bri_call():
> call id
> 0x800F, called_number
> 0282201916, speed 64, call type DATA
> 04:35:28: CCBRI_Go Fr Host InPkgInfo (Len=26) :
> 04:35:28: 1 0 1 80 F 0 4 2 88 90 18 1 83 70 B 80 30
> 32 38
> 32 32 30 31 39 31 36
> 04:35:28:
> 04:35:28: CC_CHAN_GetIdleChanbri: dsl 0
> 04:35:28: Found idle channel B1
> 04:35:28: ISDN BR0: Activating
> 04:35:28: ISDN BR0 EVENT: isdn_sw_cstate: State = 4,
> Old
> State = 4
> 04:35:29: BR0 DDR: ip (s=172.16.0.22,
> d=203.139.161.40),
> 62 bytes, outgoing inte
> resting (ip PERMIT)
> 04:35:30: ISDN BR0: Could not bring up interface
> 04:35:30: BRI0: wait for isdn carrier timeout, call
> id=0x800F
> 04:35:30: ISDN BR0: Shutting down ISDN Layer 3
> 04:35:30: ISDN BR0: Activating
> 04:35:31: BR0 DDR: ip (s=172.16.0.22,
> d=203.139.161.40),
> 62 bytes, outgoing inte
> resting (ip PERMIT)
> 04:35:31: BR0 DDR: Dialing cause ip (s=172.16.0.22,
> d=203.139.161.40)
> 04:35:31: BR0 DDR: Attempting to dial 0282201916
> 04:35:31: BRI0: call delayed. number redialed too
> soon
> 04:35:31: BR0 DDR: Unable to dial 0282201916.
> 04:35:32: ISDN BR0: Could not bring up interface
> 04:35:32: ISDN BR0: Shutting down ISDN Layer 3
> 04:35:32: ISDN BR0: Activating
> 04:35:33: BR0 DDR: ip (s=172.16.0.22,
> d=203.139.160.74),
> 62 bytes, outgoing inte
> resting (ip PERMIT)
> 04:35:33: BR0 DDR: Dialing cause ip (s=172.16.0.22,
> d=203.139.160.74)
> 04:35:33: BR0 DDR: Attempting to dial 0282201916
> 04:35:33: BRI0: call delayed. number redialed too
> soon
> 04:35:33: BR0 DDR: Unable to dial 0282201916.
> 04:35:33: BR0 DDR: ip (s=172.16.0.22,
> d=203.139.161.40),
> 62 bytes, outgoing inte
> resting (ip PERMIT)
> 04:35:33: BR0 DDR: Dialing cause ip (s=172.16.0.22,
> d=203.139.161.40)
> 04:35:33: BR0 DDR: Attempting to dial 0282201916
> 04:35:33: BRI0: call delayed. number redialed too
> soon
> 04:35:33: BR0 DDR: Unable to dial 0282201916.
> 04:35:36: ISDN Recvd L1 prim 3 dsl 0 state 0
> ctrl_state 0
> 04:35:36: ISDN BR0 EVENT: isdn_sw_cstate: State = 0,
> Old
> State = 4
> 04:35:36: ISDN BR0: Physical layer is IF_DOWN
> 04:35:36: ISDN BR0: Could not bring up interface
> 04:35:36: ISDN BR0: Shutting down ISDN Layer 3
> 04:35:36: ISDN BR0: Shutting down ME
> 04:35:36: ISDN BR0: Shutting down ISDN Layer 3
> 04:35:37: BR0 DDR: ip (s=172.16.0.22,
> d=203.139.160.74),
> 62 bytes, outgoing inte
> resting (ip PERMIT)
> 04:35:37: BR0 DDR: Dialing cause ip (s=172.16.0.22,
> d=203.139.160.74)
> 04:35:37: BR0 DDR: Attempting to dial 0282201916
> 04:35:37: BRI0: call delayed. number redialed too
> soon
> 04:35:37: BR0 DDR: Unable to dial 0282201916.
> 04:35:37: BR0 DDR: ip (s=172.16.0.22,
> d=203.139.161.40),
> 62 bytes, outgoing inte
> resting (ip PERMIT)
> 04:35:37: BR0 DDR: Dialing cause ip (s=172.16.0.22,
> d=203.139.161.40)
> 04:35:37: BR0 DDR: Attempting to dial 0282201916
> 04:35:37: BRI0: call delayed. number redialed too
> soon
> 04:35:37: BR0 DDR: Unable to dial 0282201916.
> 04:35:39: BR0 DDR: cdp, 282 bytes, outgoing
> uninteresting
> (no list matched)
> 04:35:39: BR0 DDR: sending broadcast to default
> destination -- failed, not conne
> cted
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:58 GMT-3