From: Tom Young (gitsyoung@xxxxxxxxxxx)
Date: Thu May 16 2002 - 03:43:27 GMT-3
Hi, CCIEers:
I set my Cisco813 for dialup connection, but the bri0
always couldn't be actived, I don't know what's wrong, who
can teach me?
Thanks alot
Young
-----configuration------------
TANAKA#sh ru
Building configuration...
Current configuration : 916 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname TANAKA
!
enable secret 5 $1$vcqd$JOiRp36G5vsh9AnVH60tc.
enable password JBCC
!
!
ip subnet-zero
!
no ip domain-lookup
isdn switch-type ntt
!
!
!
interface Ethernet0
ip address 172.16.0.254 255.255.0.0
ip nat inside
!
interface BRI0
ip address negotiated
ip nat outside
encapsulation ppp
no keepalive
dialer idle-timeout 60
dialer string 0282201916
dialer-group 1
isdn switch-type ntt
ppp authentication pap
ppp chap hostname x58kcssg
ppp chap password 7 151C1104057C78
ppp pap sent-username x58kcssg password 7 130B0D1A0A5A57
!
ip nat inside source list 1 interface BRI0 overload
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 BRI0 permanent
!
access-list 1 permit any
--More--
04:34:39: BR0 DDR: cdp, 282 bytes, outgoing uninteresting
(no list matched)
04:34:39: BR0 DDR: sending broadcast to default
destination -- failed, not conne
dialer-list 1 protocol ip permit
!
line con 0
line vty 0 4
password JBCC
login
!
!
end
-----debug message---------------
04:35:28: BR0 DDR: ip (s=172.16.0.22, d=203.139.161.40),
62 bytes, outgoing inte
resting (ip PERMIT)
04:35:28: BR0 DDR: Dialing cause ip (s=172.16.0.22,
d=203.139.161.40)
04:35:28: BR0 DDR: Attempting to dial 0282201916
04:35:28: ISDN BR0: Outgoing call id = 0x800F, dsl 0
04:35:120259084288: ISDN BR0: Event: Call to 0282201916 at
64 Kb/s
04:35:120266548788: ISDN BR0: process_bri_call(): call id
0x800F, called_number
0282201916, speed 64, call type DATA
04:35:28: CCBRI_Go Fr Host InPkgInfo (Len=26) :
04:35:28: 1 0 1 80 F 0 4 2 88 90 18 1 83 70 B 80 30 32 38
32 32 30 31 39 31 36
04:35:28:
04:35:28: CC_CHAN_GetIdleChanbri: dsl 0
04:35:28: Found idle channel B1
04:35:28: ISDN BR0: Activating
04:35:28: ISDN BR0 EVENT: isdn_sw_cstate: State = 4, Old
State = 4
04:35:29: BR0 DDR: ip (s=172.16.0.22, d=203.139.161.40),
62 bytes, outgoing inte
resting (ip PERMIT)
04:35:30: ISDN BR0: Could not bring up interface
04:35:30: BRI0: wait for isdn carrier timeout, call
id=0x800F
04:35:30: ISDN BR0: Shutting down ISDN Layer 3
04:35:30: ISDN BR0: Activating
04:35:31: BR0 DDR: ip (s=172.16.0.22, d=203.139.161.40),
62 bytes, outgoing inte
resting (ip PERMIT)
04:35:31: BR0 DDR: Dialing cause ip (s=172.16.0.22,
d=203.139.161.40)
04:35:31: BR0 DDR: Attempting to dial 0282201916
04:35:31: BRI0: call delayed. number redialed too soon
04:35:31: BR0 DDR: Unable to dial 0282201916.
04:35:32: ISDN BR0: Could not bring up interface
04:35:32: ISDN BR0: Shutting down ISDN Layer 3
04:35:32: ISDN BR0: Activating
04:35:33: BR0 DDR: ip (s=172.16.0.22, d=203.139.160.74),
62 bytes, outgoing inte
resting (ip PERMIT)
04:35:33: BR0 DDR: Dialing cause ip (s=172.16.0.22,
d=203.139.160.74)
04:35:33: BR0 DDR: Attempting to dial 0282201916
04:35:33: BRI0: call delayed. number redialed too soon
04:35:33: BR0 DDR: Unable to dial 0282201916.
04:35:33: BR0 DDR: ip (s=172.16.0.22, d=203.139.161.40),
62 bytes, outgoing inte
resting (ip PERMIT)
04:35:33: BR0 DDR: Dialing cause ip (s=172.16.0.22,
d=203.139.161.40)
04:35:33: BR0 DDR: Attempting to dial 0282201916
04:35:33: BRI0: call delayed. number redialed too soon
04:35:33: BR0 DDR: Unable to dial 0282201916.
04:35:36: ISDN Recvd L1 prim 3 dsl 0 state 0 ctrl_state 0
04:35:36: ISDN BR0 EVENT: isdn_sw_cstate: State = 0, Old
State = 4
04:35:36: ISDN BR0: Physical layer is IF_DOWN
04:35:36: ISDN BR0: Could not bring up interface
04:35:36: ISDN BR0: Shutting down ISDN Layer 3
04:35:36: ISDN BR0: Shutting down ME
04:35:36: ISDN BR0: Shutting down ISDN Layer 3
04:35:37: BR0 DDR: ip (s=172.16.0.22, d=203.139.160.74),
62 bytes, outgoing inte
resting (ip PERMIT)
04:35:37: BR0 DDR: Dialing cause ip (s=172.16.0.22,
d=203.139.160.74)
04:35:37: BR0 DDR: Attempting to dial 0282201916
04:35:37: BRI0: call delayed. number redialed too soon
04:35:37: BR0 DDR: Unable to dial 0282201916.
04:35:37: BR0 DDR: ip (s=172.16.0.22, d=203.139.161.40),
62 bytes, outgoing inte
resting (ip PERMIT)
04:35:37: BR0 DDR: Dialing cause ip (s=172.16.0.22,
d=203.139.161.40)
04:35:37: BR0 DDR: Attempting to dial 0282201916
04:35:37: BRI0: call delayed. number redialed too soon
04:35:37: BR0 DDR: Unable to dial 0282201916.
04:35:39: BR0 DDR: cdp, 282 bytes, outgoing uninteresting
(no list matched)
04:35:39: BR0 DDR: sending broadcast to default
destination -- failed, not conne
cted
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:58 GMT-3