Re: Cisco 2504, XMODEM

From: Mike Street (mstreet@xxxxxxxxxx)
Date: Wed May 15 2002 - 20:53:32 GMT-3


   
Loading a new flash with xmodem is only available on 16xx and 36xx - I just
read this in the manual yesterday :-)

Mike
----- Original Message -----
From: "hong tony" <aamercado31@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, May 16, 2002 10:02 AM
Subject: RE: Cisco 2504, XMODEM

> You can't use "xmodem" command on 25xx
> >
> > You can try "copy xmodem" but not sure if it works
> >
> > If you can't go to router> or router (boot)> --which
> > is set with changing your configuration-register
> > i.e..
> >
> > rommon>o/r 0x2101 <---changes to boot mode
> > or
> > rommon>o/r 0x2101 <--changes to regular router mode
> >
> > then you would need to move the flash to another
> > 2500
> > which has a boot mode to do a regular "copy tftp
> > flash" command
> > --- "David Lee Steele, Jr." <d.steele2@comcast.net>
> > wrote:
> > > Once you get a Router> prompt or Router(boot)>
> > > prompt you will need to
> > > use TFTP to upgrade your IOS.
> > >
> > > You can download the Cisco TFTP server from their
> > > website. There are
> > > versions for a number of platforms.
> > >
> > > Then from enable mode type:
> > >
> > > Router# copy tftp flash
> > >
> > > You will next be asked to enter the ip address of
> > > the TFTP server.
> > >
> > > Then, you will be asked for the name of the image.
> >
> > > Don't forget the
> > > .bin extension.
> > >
> > > You should be able to figure the rest out. If you
> > > have any questions
> > > about any of it, let me know.
> > >
> > > David
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com
> > > [mailto:nobody@groupstudy.com] On Behalf Of
> > > kris.keen@aon.com.au
> > > Sent: Tuesday, May 14, 2002 1:48 AM
> > > To: ccielab@groupstudy.com
> > > Subject: Cisco 2504, XMODEM
> > >
> > > Hi All
> > >
> > > Anyone know what release of IOS is needed for
> > > XMODEM? trying to upgrade
> > > a
> > > IOS on a 2504, but the command doesnt seem
> > > available in Rommon
> > > I cannot find the link for the 2504 upgrade
> > > procedure.
> > >
> > > Sorry for the newbie Q
> > >
> > >
> >
> -----------------------------------------------------------------
> > > Kris Keen - CNE, CCNA, CCNP
> > > Network Support Specialist - Network Systems
> > > Aon Risk Services Australia Limited
> > > (612) 9253 7272
> > > 0404862970
> > > E: Kris.Keen@aon.com.au
> > >
> > >
> > >
> > >
> > >
> > >
> >



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:57 GMT-3