From: Harish DV/peakxv (harish.dv@xxxxxxxxxx)
Date: Wed May 15 2002 - 11:52:00 GMT-3
Hi..
This is what the terminal server is for . Use a cisco 2511 ( 16 async
ports) and connect all the other routers to these ports through async
rollover cables.
Connect the 2511 on the LAN or WAN ( from wherever you what access ) and
you are good to go.
Send me a mail offlne if you need more details .
-Harish
"Malcolm Price"
<malcolm@lanbase. To: <ccielab@groupstudy.co
m>
com> cc:
Sent by: Subject: Remote access
nobody@groupstudy
.com
05/15/2002 07:15
AM
Please respond to
"Malcolm Price"
Hi all,
I was wondering if someone had any idea how to do this:
Is there a way to connect say 12 (for example) console ports into a single
remote access box, which would then allow users to telnet into 1 common ip
address giving easy access to any one of the 12 seperate console ports?.
I.e. 1 ethernet/wan address in and many console connections out. It is for
remote access ccie lab work so that remote users could have console port
access to all the routers on a classroom WAN setup.
I'd appreciate any ideas.
Many thanks,
Malcolm
Malcolm Price M.Phil. MBCS C.Eng.
Technical Director
LanBase Technologies
www.lanbase.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:57 GMT-3