RE: Two Default Routes which path?

From: Bharath Mallikarjun (bharath.mallik@xxxxxxxxx)
Date: Tue May 14 2002 - 06:01:57 GMT-3

• Next message: Chris Hugo: "Re: Just for a confirmation !! on redistribution"
• Previous message: David Luu: "Re: netbios access list"
• Maybe in reply to: Giveortake@xxxxxxx: "Two Default Routes which path?"
• Next in thread: Chuck Mason: "RE: Two Default Routes which path?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi

First it tries to go to serial 0 if the link is down then it will take the
next hop i.e serial 1 if both links are down then packet drops.

bye
bharath

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Giveortake@aol.com
Sent: Tuesday, May 14, 2002 6:47 AM
To: ccielab@groupstudy.com
Subject: Two Default Routes which path?

If I have say a 25xx router or any router with two serial interfaces, and I
put a default route say

ip route 0.0.0.0 0.0.0.0 serial 0
ip route 0.0.0.0 0.0.0.0 serial 1

What will happen to the packets if there is no route in the table? Will
they all go down the first default route? Will the packets alternate based
on sessions?

Amazing how many smart people with lots of experience I have asked that do
not know the answer to this question including myself!

Thanks,

David

• Next message: Chris Hugo: "Re: Just for a confirmation !! on redistribution"
• Previous message: David Luu: "Re: netbios access list"
• Maybe in reply to: Giveortake@xxxxxxx: "Two Default Routes which path?"
• Next in thread: Chuck Mason: "RE: Two Default Routes which path?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:56 GMT-3