From: Harish DV/peakxv (harish.dv@xxxxxxxxxx)
Date: Fri May 10 2002 - 13:42:19 GMT-3
Is ospf name lookup enabled by default?.
Harish
Hansang Bae
<hbae@nyc.rr.com> To: <ccielab@groupstudy.co
m>
Sent by: cc:
nobody@groupstudy Subject: Re: Slow on show ip os
pf neighbour
.com
05/09/2002 09:23
PM
Please respond to
Hansang Bae
At 10:36 AM 5/10/2002 +0800, Jeff Szeto wrote:
>I have 3 fully-meshed routers connected via FR, running OSPF. I found one
of
>them takes a long time to show the neighbour, about 18 seconds to show 2
>neighbours. The other two just use about 1 second.
>The slow router is a 4500 and the other are 2501 and 2621. The clock rate
used
>on the frame switch is the same for all. They are point-to-point neighbour
>This question may be silly, thinking is there any hardware problem.
On the slow router...'no ip ospf name-lookup'
hsb
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:54 GMT-3