From: Chris Young (csyoung@xxxxxxxxxxxxx)
Date: Wed May 08 2002 - 21:32:00 GMT-3
Praveen, et al,
The G2 server needs to have at least the Spirian 2000.1.2 CD's to
install. Older versions of the CD's won't recognize the G2 hardware
properly.
Also, they should have at least the bios patch 7835-BIOS-08-04-01.exe
loaded as well.
HTH,
Chris
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Praveen Bahethi
Sent: Wednesday, May 08, 2002 6:05 PM
To: ccielab@groupstudy.com
Subject: Re: OT: Cisco CallManager
David and David,
I'm running into the same issue. I've got DL380 G2 1.266 HZ processor,
1GB
RAM, 2 18.2GB SCSI HD.
The Cisco website refers to the box as being a valid CCM platform, but
the
Spherion (sp?) install crashes after disk 4 with the blue screen of
death on
the Windows 2000, 'inaccessible boot device'
I've updated the bios and am still unable to get around the problem
using
3.12(c) CCM software.
I personally feel the problem is with the Smart Array 5i not being
recognized by Spherion. I'm looking into getting 3.2 CCM software and
hope
they've got a good Spherion load.
I'll update you on my progess. I got a call into TAC about this same
issue
also.
V/R,
Praveen
----- Original Message -----
From: "David" <david_knot@yahoo.com>
To: <Dave.Craddock@avon.com>
Cc: <ccielab@groupstudy.com>; <nobody@groupstudy.com>
Sent: Wednesday, May 08, 2002 3:50 PM
Subject: Re: OT: Cisco CallManager
> i patched the box with compaq bios but will also try
> CCO bios
>
> what u said could be the answer on the varing
> software.
>
>
> --- Dave.Craddock@avon.com wrote:
> > Hi David
> > I think that the call manager that comes with
> > the Cisco box has a
> > different installer than the software only version
> > that you need to get to
> > load onto a DL380. Have you also tried the BIOS
> > updates that are on CCO for
> > the Compaq box ?
> >
> > HTH
> >
> > Dave
> >
> >
> >
> >
> >
> >
> > David
> >
> >
> > <david_knot@ya To:
> > ccielab@groupstudy.com
> >
> > hoo.com> cc:
> >
> >
> > Sent by: Subject:
> > OT: Cisco CallManager
> >
> > nobody@groupst
> >
> >
> > udy.com
> >
> >
> >
> >
> >
> >
> >
> >
> > 08/05/2002
> >
> >
> > 20:57
> >
> >
> > Please respond
> >
> >
> > to David
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > I'm trying to installa demo/training Cisco
> > CallManager
> > 3.1 (CCM) server on Compaq DL380 with 512M RAM
> > (non-Cisco branded - privately bought). Having gone
> > through all the install steps & can't launch CCM.
> > The
> > same CDs install works fine on Cisco 780 box.
> >
> > I understand Cisco make CCM work only with IBM &
> > Compaq servers, but does this mean you can't get a
> > machine independently & put the CCM software on it?
> > I
> > think they use the box ROMs to lock it with
> > particular
> > brands. So can't see why the Compaq Proliant DL 380
> > (which is in Cisco docs as a valid box) will not
> > work?
> >
> > any ideas?
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:53 GMT-3