From: WBbamo@xxxxxxx
Date: Wed May 08 2002 - 14:30:50 GMT-3
I'm running into a host route that I'm not sure how to filter or get rid of.
R1-E0 ---- 192.168.25.1/24 connected to R5 E0 192.168.25.5/24 running EIGRP
R5- S0-----192.168.60.5/27 connected to frame cloud to R7 S0-----
192.168.60.7/27 running EIGRP
R1- S0 ppp ---192.168.15.1/24connected to R3 S0 ppp --- 192.168.15.3 /24
running OSPF
R3 - S1 ppp --- 192.168.11.1/24 connected to R7 S1 ppp --- 192.168.11.7/24
running OSPF
R1 is the redistributing router between EIGRP and OSPF,
R7 should see EIGRP updates only from networks 25 and 60.
I have distribute list out on R1
deny 15.0
deny 11.0
which are working correctly. R7 is receiving the route update via OSPF for
15.0 and
11.0 and the 25 and 60 are being received via EIGRP.
However on the 15.0 serial interface is generating a host address of
192.168.15.1
and it's being advertised through EIGRP.
The 192.168.15.0/24 is learning it's route to R7 through OSPF.
I'm trying to figure how to filter the host route , so it takes the correct
path. The filter that I have is not looking at the host route because it's
in the LSA database. So therefore it takes the EIGRP route instead of
getting filtered.
Any ideas, papers or URLs, that can explain this behavior???
Thanks,
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:53 GMT-3