From: Bunny shaper (bunny_shaper@xxxxxxxxx)
Date: Tue May 07 2002 - 18:02:49 GMT-3
Hello group,
If one can help me in config issue below:
1. traffic_generator-----c7201-----c7202----receiver
traffic generator sending 3 streams of data.
1st stream source ip=100.0.0.1 dest ip=200.0.0.1
2nd stream source ip=101.0.0.1 dest ip=201.0.0.1
3rd stream source ip=102.0.0.1 dest ip=202.0.0.1
traffic generator intf ip addr= 10.10.1.1/24
c7201 intf ip addr= 10.10.1.2/24
c7201 intf ip addr= 10.10.2.1/24
c7202 intf ip addr= 10.10.2.2/24
c7202 intf ip addr= 10.10.3.1/24
receiver intf ip= 10.10.3.2/24
traffic_genetor to c7201=fastethernet
c7201 to c7202=T1 serial
c7202 to receiver= fastethernet
want to run ospf between c7201 and c7202
what will be the configuration.
2. In the above scenerio, if I configure 3 loopback
address on c7201 to receive 3 streams separately, then
how the configuration will look like.
Thanks in advance
BS
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:52 GMT-3