From: Logan, Harold (loganh@xxxxxxxxx)
Date: Tue May 07 2002 - 17:38:19 GMT-3
You got a telco to admit that their equipment was the problem??? Impressive.
Hope you got it on tape...
-----Original Message-----
From: Lopez, James [mailto:james.lopez@atosorigin.com]
Sent: Tuesday, May 07, 2002 3:15 PM
To: ccielab@groupstudy.com
Subject: RE: Simple ATM Question
Please disregard.
After a long conference call Telco confirmed that you do not swap VPI/VCI
likes DLCI's and the problem ended up being somewhere within their network.
Cheers,
-----Original Message-----
From: Lopez, James [mailto:james.lopez@atosorigin.com]
Sent: Tuesday, May 07, 2002 1:35 PM
To: ccielab@groupstudy.com
Subject: Simple ATM Question
I have a simple ATM question but my service provider can not answer it and I
know most people out here can.
We are installing an ATM hub and spoke environment and I'm trying to
determine if VPI/VCI's are similiar to DLCI's as in do they need to be
switched in the router from what telco identifies for the circuit.
For example, if I am provided 1/42 at site A and 1/43 at site B which is
the correct configuration?
Site A:
pvc 1/42
Site B:
pvc 1/43
OR
Site A:
pvc 1/43
Site B:
pvc 1/42
TIA,
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:52 GMT-3