From: George Hansen (HansenG@xxxxxxxxxxxxxxxx)
Date: Thu May 02 2002 - 21:24:12 GMT-3
Does Router B know how to get to 40.40.40.4? Does Router A know how to get to 1
0.10.10.1?
George
>>> "peter brown" <pita40@hotmail.com> 05/02/02 05:01PM >>>
Hello,
I notice that when I use nei x.x.x.x update-source lo0 on both side of ibgp
nei that are directly connected they loose tcp connection with each other.
When I remove update-source statement from one nei and use the physical int.
they are able to establish tcp connection. Why is this the case. Are you
only suppose to use it only on side between two nei. Below is the config.
Router A
interface Loopback0
ip address 40.40.40.4 255.255.255.0
no ip directed-broadcast
interface Serial0
ip address 10.1.1.4 255.255.255.0
no ip directed-broadcast
router bgp 50
neighbor 10.1.1.1 remote-as 50
neighbor 10.1.1.1 update-source Loopback0
no auto-summary
Router Binterface Loopback0
ip address 10.10.10.1 255.255.255.0
no ip directed-broadcast
interface Serial0
ip address 10.1.1.1 255.255.255.0
no ip directed-broadcast
router bgp 50
neighbor 10.1.1.4 remote-as 50
neighbor 10.1.1.4 update-source Loopback0
no auto-summary
no ip mroute-cache
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:49 GMT-3