From: John Suhoski (cty02496@xxxxxxxxxxxxxx)
Date: Thu May 02 2002 - 00:08:25 GMT-3
Li:
Unfortunately token ring cables aren't just a 9 pin cable to an RJ-45. You
need a media converter(some passive electronics are involved) . Some of the
converters look like a RJ-45 to DB-9 connector but they aren't. The ones I
have for my hame lab are from Cabletron and the only marking are "TRMF 802.5
Media Filter", it has a small tan box with an RJ-45 plug on one side and a
short
cable with a 9-pin male on the other side. I got them off of ebay for about
$10ea.
Hope this helps
John Suhoski
"Xu, Li" wrote:
> I tried to make a token ring cable to connect a 2502 router to a SynOptics
> hub. Here is pinout for the cable:
>
> RJ45 3 4 5 6
> DB9 9 1 6 5
>
> Did I miss anything, could someone help me?
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:48 GMT-3