From: perkinsr@xxxxxxxxxxxxxx
Date: Wed May 01 2002 - 11:19:25 GMT-3
I had this problem recently with hyper term. For me it was the software, I
used the old terminal program from win 3.1 and it worked great. Here is a
link to cisco showing possible break key sequences for various products:
http://www.cisco.com/warp/public/701/61.html
Ray Perkins
-----Original Message-----
From: Brett Lewis [mailto:blewis@3net-uk.com]
Sent: Wednesday, May 01, 2002 7:03 AM
To: Bill Mckenzie; ccielab@groupstudy.com
Subject: RE: Break sequence and Win 2000
I usually just use <ctrl> <break> to get into rommon mode.
Brett
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bill Mckenzie
Sent: 01 May 2002 14:39
To: ccielab@groupstudy.com
Subject: Break sequence and Win 2000
I have tried (without success) to be able to use the break sequence to
change the register values for my routers. I am using Windows 2000 and have
used three different terminal emulation programs. I do a CNTL + Shift + 6
and then b, and the B just shows up on the command line and I'm not able to
go into the register. Does anyone have a solution for this?
Thanks,
Bill Mckenzie
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:48 GMT-3