RE: Break sequence and Win 2000

From: Brett Lewis (blewis@xxxxxxxxxxx)
Date: Wed May 01 2002 - 11:02:32 GMT-3

• Next message: Lupi, Guy: "BGP tables increasing significantly"
• Previous message: Howard C. Berkowitz: "Some free scenarios and tutorials (slight correction)"
• Maybe in reply to: Bill Mckenzie: "Break sequence and Win 2000"
• Next in thread: Palacios, Gonzalo: "RE: Break sequence and Win 2000"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I usually just use <ctrl> <break> to get into rommon mode.

Brett

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Bill Mckenzie
Sent: 01 May 2002 14:39
To: ccielab@groupstudy.com
Subject: Break sequence and Win 2000

I have tried (without success) to be able to use the break sequence to
change the register values for my routers. I am using Windows 2000 and have
used three different terminal emulation programs. I do a CNTL + Shift + 6
and then b, and the B just shows up on the command line and I'm not able to
go into the register. Does anyone have a solution for this?

Thanks,
Bill Mckenzie

• Next message: Lupi, Guy: "BGP tables increasing significantly"
• Previous message: Howard C. Berkowitz: "Some free scenarios and tutorials (slight correction)"
• Maybe in reply to: Bill Mckenzie: "Break sequence and Win 2000"
• Next in thread: Palacios, Gonzalo: "RE: Break sequence and Win 2000"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:48 GMT-3