From: Stephen Austin (routepackets@xxxxxxxxxxxxx)
Date: Tue Apr 30 2002 - 22:23:35 GMT-3
Suppose you have a router with a single FXS card, let's say:
voice-port 1/0
voice-port 1/1
To configure the hunt group, simply create the dial peer to include the physica
l port. Then, assign the same destination pattern to each dial-peer. Lastly, us
e the 'preference' command. By default, the dial peer is 'preference 0'. The se
cond dial-peer would use 'preference 1', and so forth. Accepted values are 1-10
.
Regards,
Steve Austin
On Tue, 30 Apr 2002 18:15:42 +0100 steven.j.nelson@bt.com wrote:
Group,
I am looking to configure a hunt group on a standard voice box with fxs
cards, i.e if one number does not answer or failes the next number in the
chain is dialed.
i.e user 1 (phone 2212) dials 3777, if 3777 does not answer or fails then
thr router automatically dials 3778
I know this can be done with call manager with a hunt group, but can it be
done on a standard router with no call manager. I have checked CCO and
cannot find any reference to this kind of thing..
Thanks
Steve
Steve Nelson
Customer Engineer
BT Ignite- National Solutions
T: +44 (0)1422 338881 M: +44 (0)7811 944172
e-mail: steven.j.nelson@bt.com
pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> British Telecommunications plc
> Registered office: 81 Newgate Street London EC1A 7AJ
> Registered in England no. 1800000.
> This electronic message contains information from British
Telecommunications plc which may be privileged or confidential. The
information is intended to be for the use of the individual(s) or entity
named above. If you are not the intended recipient be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited. If you have received this electronic message in error, please
notify us by telephone or email (to the numbers or address above)
immediately.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:24 GMT-3